Hot：Labor Day Event: Randomly draw free items

Hot：Labor Day Event: Randomly draw free items

Hot：Labor Day Event: Randomly draw free items

When you first start using a sticky pan, you can refer to the following steps and words:
Step 1: Because our pans are uncoated, the non-stick effect may be more obvious than that of uncoated pans at the beginning, but the longer you use the uncoated pans, the smoother the pan wall absorbs the grease, and the better the non-stick effect. You can rest assured about this. Your pan surface is also relatively dry. You can turn on the pan again. Don't pour out the oil after turning it on. Just put it in the pan, cover it, and leave it until tomorrow to clean and use it. The effect will be much more obvious.

Step 2: Sticking pan due to heat (ask the customer if the oil smoke is large)
Because our pans conduct heat much faster than ordinary pans, medium and small fires can have the effect of high fire, so the oil smoke will be very small and the non-stick effect will also be very good. You just said that the oil smoke is quite large when cooking, so this means that your heat is still too high. You can continue to adjust it to a lower level, and the effect will be more obvious.

Step 3: Sticky pans that are operating normally in all aspects (try not to use detergent)
It is generally not recommended to use detergent or steel wool to wash the pan. Because detergent is very destructive, it will penetrate into the pan and dissolve the oil layer, so that the oil layer you worked hard to maintain the pan before will be decomposed. For normal use, you can use baking soda or alkaline powder for cleaning, and the cleaning effect is also very good.

After use, clean the pan with a rag and hot water, then put it on the stove on a low heat to dry the moisture, and use kitchen paper or a brush to apply a thin layer of oil for maintenance, and the non-stick effect will be very obvious.

1. Inspired by the elegance of black pearls

2. Combined with core iron composite technology

3. Solve the problem of rust and bulkiness of iron pots, making them less likely to burn

4. Improve the experience of using iron pots

5. Improve wear resistance, use high temperature technology and high temperature melting

6. Anti-rust iron pot technology

7.0 coating, no burning, less oil burning

8.Transparent brown lid

9. The pot body is enlarged and deepened